2. Motor Unit
________________________________________________________________________
The e-nose has the following components installed.
- Hacker A20 XL
- Speed Controller YEP 30Ah
- Nanotech Lipo 1000mAh 11.1V max.40C
- Aeoronaut Cam Carbon 8x7''
- Femo `Versatzmitnehmer and Spinner`
Please observe the operating and maintenance instructions of the respective manufacturer.
The speed controller with BEC is already programmed.
Before inserting the Lipo, hold the receiver cable in the flight direction above and
insert the Lipo, then plug it in and fully push it up to the light stop. Do not push the
receiver cable. Only when the lipo is in the correct position can the nose be easily
and without any effort.
The Apus is ideal for the `Flitschen`. If necessary, the `Flitschen`-hook is screwed
into the thread in the front part of the glider's nose. Tighten the screwing of the nose
and tail tightly. Now the Apus can be raised on the rubber. The start is with ailerons
on speed position. At the first start-up attempts should be started with a slightly
drawn elevator.