1. Locate holes in door post and cut holes in the fabric.
2. Hold door (A) to door post and bottom of the wind-
shield.
3. Mark location of holes in the door post to the door.
4. Cut 5/8” slots next to wire frame of door and attach to
door post using four (4) #10 x 3/4” bolts, clips and nuts.
5. Tie door flap (B)
6. Tighten all bolts.
DOORS
A
B
1. Mark location of holes in windshield to side window (A).
2. Cut 5/8” slots next to wire frame of window and attach
to windshield using #10 x 3/4” bolts, clips and nuts.
3. At location (B), cut 5/8” slots inside window and top of
door and attach using #10 X 3/4” bolt, clip and nut.
4. Repeat procedure for other side.
5. Tighten all bolts.
SIDE WINDOWS
A
1. Remove loader valve and attach loader valve plate (A)
using 5/16” x 1” bolts.
2. Attach loader valve and tighten all bolts.
LOADER VALVE PLATE
B
A
