Fema Electronica K K40-A Series, User Manual

Page: 11 / 24

FEMA ELECTRÓNICA . Series K . K40-A
11
1.10 Configuration menu (cont.)
Option 1
Configuration menu for the module installed at Opt.1
Option 2
Configuration menu for the module installed at Opt.2
Option 3
Configuration menu for the module installed at Opt.3
Password
Version
Factory reset
Minimum
Brightness
Maximum
Standard The ‘ Version ’ (‘ VEr ’) menu informs of the current firmware version
installed in the module.
At the ‘ Password ’ (‘ PASS ’) menu select a 4 digit code to block access
to the ‘ configuration menu ’. Instrument configuration will not be ac -
cessible to non authorized personnel. To activate the ‘ Password ’ se -
lect ‘ on ’ and introduce the code.
The code will be requested when trying to access the ‘
configuration
menu
’ (key ‘SQ’ (
<
)). The ‘
fast access
’ menu is not password pro -
tected.
1.12.8 Menu ‘Key LE’
At the ‘ Brightness ’ (‘ LIGh ’) menu select the light intensity for the
front leds. With this function it is possible to adapt the instrument to
the environment light intensity.
Menus ‘ OPt.1 ’, ‘ OPt.2 ’ and ‘ OPt.3 ’ give access to the ‘
configuration
menus
’ of the output and control modules installed at slots Opt.1,
Opt.2 and Opt.3.
See section
2
for a list of output and control modules available for
each slot. The ‘
configuration menu
’ of each module is described at
the User’s Manual of each module.
At the ‘ Factory reset ’ (‘ FAct ’) menu, select ‘ yes ’ to load the default
factory configuration for the instrument (see section 1.17).
Key LE
Alarm unlock
No function
The ‘LE’ (
3
) key at the front of the instrument can be configured to
activate several functions. Only one function can be assigned to the
‘LE’ (
3
) key
• the ‘ No function ’ (‘ nonE ’) value assigns no function.
• the ‘ Alarm unlock ’ (‘ A.Lck ’) value assigns the manual unlock of the
alarms function, for instruments with the ‘ Locked alarms ’ (‘ A.Lck ’)
function activated
(see section 1.12.3)
AC deadband
The ‘ AC deadband ’ (‘ d.bnd ’) parameter enables or disables the func -
tion that makes reading ‘0’ when signal is below 0.5% of teh selected
range.
1.12.9 AC dead band
1.12.10 Function ‘Password’
1.12.11 Factory reset
1.12.12 Firmware version
1.12.13 Brightness
1.12.14 Access to optional modules