14
FELTON
CONNECTING THE FLOW CONTROLLER
13
A. Fit the outlet pipe and the brass
connector onto the Flow control unit.
B. Push a Flow control unit with outlet
fitting back into the Digital Mixer and fit
the short retaining bolt with torx screw
driver supplied.
ADVICE:
Push in firmly!
14
Connect the Data Cable coming from the Control Unit. Use the large 6 pin connector and
push firmly into the socket. Feed the cable through the one of the guide slots in the front
of the Digital Mixer.
Data Cable
connection
Flow control unit
A
B
Short retaining bolt
Summary of Contents for TATE SMARTFLOW
Page 2: ...2 FELTON...