10.
For technical assistance please ring: 0800 743 358 or (09) 528 0810
Felton Industries Limited
8 Farmhouse Lane, Glen Innes, Auckland 1072 New Zealand
www.felton.co.nz
Warranty, Maintenance and Care
YOUR COPY TO KEEP
Felton Industries Limited guarantees these products to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase. Fair wear and tear
is expressly excluded. This warranty is effective for 5 years from the date of purchase for the supply of replacement parts only, not including installation. You must retain proof of
purchase of the product (such as an invoice or receipt) and provide this to Felton on request. This warranty is for manufacturing defects only and does not cover any damage to the
product due to abuse, negligence or improper installation. This warranty is given on the understanding that the product is installed and operated according to Felton’s installation
guide and the Australian/New Zealand standard AS/NZS3500. This warranty is provided to persons who are a “consumer” under the Consumer Guarantees Act 1993 only and for
use in domestic/residential dwellings only (not for commercial use).
At no stage should any surface coatings be cleaned with cleaning agents that contain a corrosive acid or a scouring additive. Surface coatings should be cleaned with
liquid detergent or soap and water. Any damage caused through the use of an unsuitable cleaner will not be covered by this warranty. This warranty is subject to any
other rights or remedies that you may have under the Consumer Guarantees Act 1993 (or any other applicable legislation) and to Felton’s Terms of Trade.
Please fill in the details below, attach your receipt to this installation guide and keep as your proof of purchase.
Purchased at:
Date of purchase:
Installed by:
011020JC
Check flow restrictor is fitted into the handpiece. Screw the hose
onto the diverter and handpiece and attach the handpiece to the
slider on the rail.
Check the flow restrictor is fitted underneath the mesh washer in
the rain head. Fit the rain head onto the thread on the end of the
arm. Turn on water and check for leaks.
8.
Fit both flanges onto the top
and bottom wall mount. Ensure
that the grubscrews are still
accessible.
The column top mount should
sit flush with the easy fit adaptor.
Push the assembly onto the wall
fitting and tighten all grubscrew
with an allen key. Once fixed,
push the flanges so that they
are flush against the wall.
9.
RUBBER MESH
FILTER
FLOW
RESTRICTOR
RESTRICTOR
SLEEVE
