Felt TA FRD, User Manual

Page: 13 / 18

13
“RACE” CRANK INSTALLATION
STEPS:
1. Insert Left 2.0mm aero spacer onto crank spindle.
2. Lightly grease spindle.
3. Insert crank spindle from left to right.
4. Place Right 7.7mm aero spacer onto spindle.
5. Place wave washer onto spindle.
6. Lightly greasy spindle spline.
7. Place right crankarm onto spindle. Tighten with 10mm Allen key
and then use torque wrench to fully tighten to 38-41 Nm.
PARTS:
A. Vision Metron Aero Crank, LHD, BB30, 130BCD
B. 50, 51, 52, 53, 54, 55T 3/32” chain rings
C. 5x T30 10mm chain ring bolts
D. “Left” 2.0mm aero spacer
E. “Right” 7.7mm aero spacer
F. Wave washer
REQUIRED TOOLS:
- 10mm Allen key
- Torque wrench
- Grease