Felt TA FRD, User Manual

Page: 11 / 18

11
“TRAIN” CRANK INSTALLATION
STEPS:
1. Insert Left 11.7mm aero spacer onto crank spindle.
2.
Lightly grease spindle.
3. Insert crank spindle from left to right.
4.
Place Right 7.7mm aero spacer onto spindle.
5. Place wave washer onto spindle.
6.
Lightly greasy spindle spline.
7. Place right crankarm onto spindle. Tighten with 10mm Allen key and then use
torque wrench to fully tighten to 38-41 Nm.
PARTS:
A. Vision Track Crank, LHD, BB30, 144BCD
B. 50, 51, 52, 53, 54, 55-tooth, 3/32” chain rings
C. 5 x T30 8mm chainring bolts with nuts
D. “Left” 11.7mm aero spacer
E. “Right” 7.7mm aero spacer
F. Wave washer
REQUIRED TOOLS:
- 10mm Allen key
- Torque wrench
- Grease