Switch the power on (Power switch located at the rear
of the machine).
Select the ‘Standby’ button on the control panel. Check
the LCD Screen turns on. The LCD interface allows
selection of these functions:
- AutoLam - automatic laminating
- Manual laminating
- Open for maintenance
- Help information
The laminator will automatically start in AutoLam
mode and begin warm-up if no other setting is selected
within 5 seconds.
The ‘Ready’ screen will show when warm-up is
complete and two short beeps indicate that machine is
ready and user can insert pouch. The AutoLam setting
automatically selects the optimum laminating settings
for the inserted item and pouch for best laminating
results.
Place item into open pouch. Ensure it is centred against
the sealed edge. Use the appropriate pouch size for
the item.
Place the pouch, sealed edge first, into the pouch /
document entry. Keep the pouch straight and central
within the document entry, not on an angle. Use the
entry markings as a guide.
Upon exit, the laminated pouch is hot and soft. Remove
the pouch immediately. Place pouch onto a flat surface
to cool. This helps to prevent any jamming.
To reverse the laminating process at any stage, press
the ‘Reverse’ button to eject the item. The laminator
will beep whilst reversing.
5.
6.
7.
8.
9.
STEPS TO LAMINATE - AutoLam
6
Let our experts help you with a solution.
Customer Service:
www.fellowes.com
Help Line Europe:
00-800-1810-1810
NEED HELP?
Ensure the machine is on a stable surface. Check there
is enough clear space (min 50cm) behind the machine
to allow items to pass through freely.
Select the correct power lead for the appropriate power
supply. Fit the lead to the machine (the socket is at the
rear of the machine).
Plug the machine into an easily accessible mains socket.
Switch the mains supply on.
To fully support pouches and items of different sizes
please use the adjustable entry guide to centre the item
before laminating.
1.
2.
3.
4.
SETTING UP THE LAMINATOR
10.
11.
12.
