background image

FEATURES & TIPS

‘Release’ function

 

To remove or re-align a pouch during 

lamination, activate the release lever 

located on the back of the machine. The 

pouch can only be removed from the 

entry slot when the lever is activated.

Auto Shut Off

 

After 30 minutes, the machine will 

automatically go in to Auto Shut Off 

mode. The Power LED will flash red for 

5 minutes and then turn off. The ready 

LED will turn off. To continue using the 

machine press the ON/OFF switch. The 

machine will reset itself.

• 

For best results, use Fellowes ® brand pouches:  

3-5 mil.

• 

This machine does not need a carrier to laminate. 

It is a carrier-free mechanism.

• 

Always put the item to be laminated into the ap-

propriate sized pouch.

• 

Always test laminate with a similar size and thick-

ness before final process.

• 

Prepare pouch and item for lamination. Place item 

within pouch centered and touching the leading 

sealed edge. Ensure the pouch is not too large for 

the item.

• 

If required, trim excess material from around the 

item after lamination and cooling.

5

SETTING UP THE LAMINATOR

Ensure the machine is on a stable surface.  

Check there is enough clear space (min 20”) behind 

the machine to allow items to pass through freely.

Plug the machine into an easily accessible main 

socket.

HOW TO LAMINATE

Switch the power on (located at the side of the 

machine).

The red ‘Power on’ lamp will light up. The machine is 

now heating up.

When the machine is ready, the green ‘Ready’ lamp 

will remain on.

Place the document into the open pouch. Ensure the 

document is centered against the sealed edge. Use 

the appropriate pouch size for the document.

Ensure the pouch enters the machine sealed edge 

first. Keep the pouch straight and central within the 

slot, not on an angle. Use the entry markings as a 

guide.

Upon exit, the laminated pouch may be hot and soft. 

To prevent jamming remove the pouch immediately. 

Place pouch on to a flat surface to cool. Take care 

when handling a hot pouch.

To release a pouch during lamination, activate the 

release lever located on the back of the machine. 

Gently pull pouch out of machine.

1.
2.

3.

4.

5.

6.

7.

8.

9.

10.

NEED HELP?

Let our experts help you with a solution.

Customer Service...   

 

www.fellowes.com

Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.

Consider registering your machine at www.fellowes.com/register to receive updates and additional information.

Auto

Shut

Off

Summary of Contents for Spectra 95














Reviews: