background image

ENGLISH 

Model HD-10Cs

Place head on basket
as shown:
Disconnect power switch 
must be in ON ( I )  
position to operate 
shredder.

HD-10

C

s

Active

Not Active

KEY

A. SafeSense

® 

 Technology

 

B.  See safety  

instructions below

C. Paper entry
D. Waste opening

E. Mesh basket
F.  Disconnect power switch
 

 1. OFF

     2. ON
G. Handle
H. SafeSense

®

 override    

 switch

CAPABILITIES

Will shred:

  Paper, small paper clips, credit cards and staples

Will not shred:

  Unopened junk mail, continuous forms, adhesive labels, transparencies, 

newspaper, CD/DVDs, cardboard, large paper clips, laminates, file folders, X-rays or plastic 
other than noted above

Paper shred size:

   

Cross-Cut .................................................................................................... 4mm x 50mm

Maximum:

   

Sheets per pass ........................................................................................................... 10* 
Cards per pass ................................................................................................................. 1 
Paper width ........................................................................................................... 230mm 
* A4 (70g), paper at 220-240V, 50 Hz, 1.7Amps; heavier paper, humidity or other than 

rated voltage may reduce capacity. Maximum recommended daily usage rates: 100 
sheets; 5 credit cards. 

 10 sheets per pass to avoid jams.

  Fellowes SafeSense

®

 shredders are designed to be operated in home and office  

  environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) 
  and 40 – 80% relative humidity 

B.

A.

C.

D.

E.

G.

F.

H.

I.

I.  Control Switch and  
 Indicator 

lights

 

  1. Auto-On (green)

 O 2. 

OFF

 R 3. 

Reverse

 

  4. Overheat (red)

  5. 

SafeSense

®

 (yellow)

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

t 0QFSBUJPONBJOUFOBODFBOETFSWJDFSFRVJSFNFOUTBSFDPWFSFEJO

the instruction manual. Read the entire instruction manual before 
operating shredders.

t ,FFQBXBZGSPNDIJMESFOBOEQFUT,FFQIBOETBXBZGSPNQBQFS

entry. Always set to off or unplug when not in use.

t ,FFQGPSFJHOPCKFDUToHMPWFTKFXFMSZDMPUIJOHIBJSFUDoBXBZ

 

from shredder openings. If object enters top opening, switch to 
Reverse (R) to back out object.

t

Never use aerosol products, petroleum based lubricants or other flammable 
products on or near shredder. Do not use canned air on shredder.

t %POPUVTFJGEBNBHFEPSEFGFDUJWF%POPUEJTBTTFNCMFTISFEEFS

 

Do not place near or over heat source or water.

t

This shredder has a Disconnect Power Switch (F) that must be in the ON (I) 
position to operate shredder. In case of an emergency move switch to OFF (O) 
position. This action will stop shredder immediately. 

t "WPJEUPVDIJOHFYQPTFEDVUUJOHCMBEFTVOEFSTISFEEFSIFBE
t 4ISFEEFSNVTUCFQMVHHFEJOUPBXBMMPVUMFUPSTPDLFUPGUIFWPMUBHFBOEBNQFSBHF

designated on the label. The outlet or socket must be installed near the equipment 
and easily accessible. Energy converters, transformers, or extension cords should 
not be used with this product.

t '*3&)";"3%o%P/05TISFEHSFFUJOHDBSETXJUITPVOEDIJQTPSCBUUFSJFT
t 'PSJOEPPSVTFPOMZ
t 6OQMVHTISFEEFSCFGPSFDMFBOJOHPSTFSWJDJOH

 

Reviews: