Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of
defects in material and workmanship and provides service and support for 2 years from the date of
purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free
from defects in material and workmanship for 5 years from the date of purchase by the original
consumer. If any part is found to be defective during the warranty period, your sole and exclusive
remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage
standards, shredder operation using an improper power supply (other than listed on the label), or
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs
incurred by Fellowes to provide parts or services outside of the country where the shredder is initially
sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE
8"33"/5:1&3*0%4&5'035)"#07&*OOPFWFOUTIBMM'FMMPXFTCFMJBCMFGPSBOZDPOTFRVFOUJBM
or incidental damages attributable to this product. This warranty gives you specific legal rights.
The duration, terms, and conditions of this warranty are valid worldwide, except where different
MJNJUBUJPOTSFTUSJDUJPOTPSDPOEJUJPOTNBZCFSFRVJSFECZMPDBMMBX'PSNPSFEFUBJMTPSUPPCUBJO
service under this warranty, please contact us or your dealer.
PAPER/CARD
3
10M
10
2
BASIC SHREDDING OPERATION
Continuous operation:
Up to 10-minutes maximum
NOTE:
Shredder runs briefly after each pass
to clear entry. Continuous operation beyond
10-minutes will trigger 20-minute cool down period.
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This
indicator will remain illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about
the continuous operation and recovery time for this shredder.
TROUBLESHOOTING
Shredder doesn’t start:
Make sure switch is in on position ( I ).
Make sure safety lock is in unlock position.
Make sure bin is closed.
Check for jam.
Remove and empty bin.
Wait 20 minutes for motor to cool down.
PAPER JAM
Alternate slowly back and forth
Set to Reverse (
)
for 2-3 seconds
Set to Off ( )
and unplug
Gently pull uncut
paper from paper
entry. Plug in
Set to Auto-On ( I )
and resume shredding
5
LIMITED PRODUCT WARRANTY
Safety Lock prevents accidental operation. To set, wait for shredding to stop, set control switch to Off ( ) position, then slide black button down.
To unlock, slide black button up. For greater safety, always unplug shredder after use.
10M
10
Feed paper/card
straight into paper
entry and release
When finished shredding,
set to Off ( )
1
4
3
1
2
PRODUCT MAINTENANCE
"MMNJDSPDVUTISFEEFSTSFRVJSFPJMGPSQFBLQFSGPSNBODF*GOPUPJMFEB
machine may experience diminished sheet capacity, intrusive noise when
shredding, and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
OILING SHREDDER
* Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
*Apply oil across entry
Set to Reverse (
)
for 2-3 seconds
Set to Off ( )
6
3
Remove Paper: When illuminated, press reverse (
BOESFNPWFQBQFS3FEVDFQBQFSRVBOUJUZUPBOBDDFQUBCMFBNPVOUBOESFGFFEJOUPQBQFSFOUSZ
Australia Residents Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable
MPTTPSEBNBHF:PVBSFBMTPFOUJUMFEUPIBWFUIFHPPETSFQBJSFEPSSFQMBDFEJGUIFHPPETGBJMUPCFPGBDDFQUBCMFRVBMJUZBOEUIFGBJMVSFEPFTOPUBNPVOUUPBNBKPSGBJMVSF5IFCFOFGJUTVOEFS'FMMPXFT8BSSBOUZBSF
in addition to other rights and remedies under a law in relation to the shredder.
10
3
2
4
Plug in and put
disconnect power
TXJUDIJO0/ oQPTJUJPO
1
Set to Auto-On (I)
