Fellowes Metal 25, Instructions Manual, Page: 12 / 15

ENGLISH
13
BINDING A DOCUMENT
CORRECTING A BOUND DOCUMENT
Additional sheets may be included or removed at any time by first removing the old metal coil. Correct document as necessary, then rebind as
described.
Punch front and back covers
first.
Collate the document. Load the
coil on to the holes.
3
Use the binding pliers to cut the
end of the metal coil. Clip off the
excess coil.
4
Turn the document around.
5
Clip off the excess coil.
6
Punch sheets in small batches
so as not to overload the
machine or the user.
2
MÁX 10
(80gsm)
REMOVAL OF WASTE CLIPPINGS
The waste tray is located in the back of the machine. For best results empty the tray regularly.
1