background image

6

TROUBLESHOOTING

STORAGE & CLEANING

Problem

Possible cause

Solution

No glowing ‘blue’ Power on LED

Machine not switched on

Switch on machine at right rear side and at wall 

socket. Press power standby button

Pouch does not completely seal 

the item

Item may be too thick to laminate

.BYJNVNEPDVNFOUUIJDLOFTTFRVBMT1BTT

through laminator a second time

Pouch is lost in the machine

1PVDIJTKBNNFE

Machine will automatically reverse the document. 

*GKBNJTOPUDPNQMFUFMZDMFBSFE3FWFSTFCVUUPO
XJMMCMJOLnBTI1SFTTBOEIPMESFWFSTFCVUUPO

while pulling on pouch to completely remove 
pouch.

Pouch was inserted open end first

Pouch was not centered on entry

Pouch was not straight upon entry

Empty pouch was used

Damaged rollers or adhesive on rollers

Pouch is damaged after lamination Damaged rollers or adhesive on rollers

Pass cleaning sheets through the machine to test 

and clean rollers

Turning off the Machine – If the top power button is pushed, the machine will go into cool-down mode. The heaters will turn off, but 
the rollers will still run until the unit reaches the desired temperature to turn off completely. This functionality reduces long term wear 

BOEUFBSUPUIFVOJU6OQMVHUIFNBDIJOFBUUIFXBMM5IFPVUTJEFPGUIFNBDIJOFDBOCFDMFBOFEXJUIBEBNQDMPUI%POPUVTFTPMWFOUT

or flammable materials to polish the machine. Cleaning sheets can be purchased for use with the machine. When the machine is warm 
– run the sheets through the machine to clean any residue off the rollers. For optimum performance, it is recommended that cleaning 

TIFFUTBSFVTFEXJUIUIFNBDIJOFSFHVMBSMZ $MFBOJOHTIFFUPSEFSDPEF

NEED HELP?

L

FUPVSFYQFSUTIFMQZPVXJUIBTPMVUJPO

Customer Service...   

 www.fellowes.com

Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.

$POTJEFSSFHJTUFSJOHZPVSNBDIJOFBUXXXGFMMPXFTDPNSFHJTUFSUPSFDFJWFVQEBUFTBOEBEEJUJPOBMJOGPSNBUJPO

Summary of Contents for jupiter 2 125















Reviews: