Page 2
Please review
these instructions before beginning the installation. Use the illustrations below to check that all components needed for your installation
were provided with your order. Do not discard the packaging until the product works to your satisfaction.
Components and tools
Additional tools required
• Power drill with assorted drill bits
• Phillips screwdriver
• Phillips #1 and #2 bits
VictoryLX 3-leg
Components and tools
Caution
• Hand tighten all hex head screws. Use power drill on self-tapping screws
only.
• Always check that screws used to attach components to the worksurface
are not too long for the thickness of the table.
table
thickness
top supports (2)
motor cable
locking clips (4)
center leg bracket (1)
center bracket
screws
M6x15
socket cap (8)
cord clips (10)
feet screws
M3.5x16
#2 Phillips
flat head (10)
cam locks (3)
with cotter pin
outer legs
with motor (2)
center leg
with motor (1)
left frame segment (1)
right frame segment (1)
M6x15
socket cap (8)
5mm
Allen key (1)
feet (2)
M4.8x22 #2 Phillips
round head (22)
frame screws
motor cables (3)
power cable (1)
M3x20 #1 Phillips
round head (3)
M5x25 #2 Phillips
round head (2)
digital keypad (1)
control unit (1)
