Page 4
VictoryLX 3-leg
Assembly
Step #3: position frame on table
• Expand the cross channels to position the top supports 1" from the left and right edges of the table.
— Center the mounting tabs on the U-tubes to be sure each tube can be captured by the set screws.
— With longer tables, the U-tubes may need to “float” — they may not extend all the way into the cross channels (see below).
• Position the rear cross channels 6.5" or 9.5" from the rear edge of the table, depending on table depth: 6.5" for tables 24" deep and 9.5" for tables 30" deep.
• The center leg bracket should be centered under the angle of the table top. If it is not, check that the frame is positioned according to the diagram below.
• Tighten all set screws.
dotted line =
30" depth
tighten all
set screws
center mounting tabs
bracket is centered
under angle of table
top
support
top
support
expand
cross channels
cross channels
1"
1"
6.5"
9.5"
“floating”
U-tubes
