Page 5
Lotus DX
cord management
step 2b
Continue routing the cords around the workstation through the cord channel to the rear. Insert the cord
funnel in 1 of 2 locations on the cord channel. Choose the location that will best accommodate your setup.
step 3
Gather all cords, including the monitor cords. Apply the cable zip using the provided tool.
Push the cable zip upward
into the cable zip tool.
Pull down on the cable zip
tool while holding the top
of the cable zip.
step 4
Slide the end of the cable zip into the cord funnel
to lock into place.
step 2c
The rear USB ports are meant for data transfer
devices. Plug your mouse and keyboard into
the rear USB hub and route the remaining cords
through the cord funnel.
