Fellowes Cambio, Manual

Page: 8 / 82

8
Error No. Description Solution Error No. Description Solution
&&
Electrical problem
Disconnect power for
30 seconds and reconnect
&&
Motor failure Reset the system
E02 Screw rod error Reset the system
&
Desk run in wrong direction
3FQMBDFUIFNPUPSDPSE .
E04 Digital controller connection error
Check the connection
then reconnect the power
&&
Weight overload Remove the items on the desktop
&
Collision avoidance system Release the button E21 No connection
$IFDLUIFDPOOFDUJPO .
E06 Electrical problem Replace the control box E23 Motor wire broken
$IFDLUIFOSFQMBDFUIFNPUPSDPSE .
E08 Desktop inclines Reset the system E24 Hall wire broken
$IFDLUIFOSFQMBDFUIFNPUPSDPSE .
E11 No connection
$IFDLUIFDPOOFDUJPO . &
Short circuit
3FQMBDFUIFNPUPS .
&&
Abnormal current Replace the control box
&
Desk run in wrong direction
3FQMBDFUIFNPUPSDPSE .
E13 Motor wire broken
Check then replace the motor cord
.
E42 Memory function failure Replace the control box
E14 Hall wire broken
Check then replace the motor cord
.
E43
Sensor Failure of Collision
Avoidance System
Replace the control box
&
Short circuit
3FQMBDFUIFNPUPS .
6. RESET THE CONTROL UNIT
8IJMFUIFVOJUJTQPXFSFEPOQSFTTUIF BOE CVUUPOTTJNVMUBOFPVTMZVOUJMUIFCV[[FSCFFQT5IFEFTLXJMMNPWFEPXOUPUIFMPXFTUQPTJUJPOUIFOSBJTFBMJUUMF%POPU
release the buttons until the process is complete.
7. TROUBLESHOOTING
Note:
4FMGQSPUFDUJPOGVODUJPOUIFVOJUXJMMFOUFSQSPUFDUJWFNPEFJGUIFTZTUFNPQFSBUFTJOFYDFTTPGUXPNJOVUFTXJUI)05POUIFDPOUSPMEJTQMBZ5IFTZTUFNXJMM
reset and return to normal operation after approximately 20 minutes.
0WFSMPBEQSPUFDUJPONPEFXIJMFPQFSBUJOHJGUIFMPBEPOUIFEFTLJTPWFSXFJHIUDBQBDJUZUIFTZTUFNXJMMFOUFSJOUPBOPWFSMPBEQSPUFDUJPONPEF5IJTXJMM
QSPUFDUUIFTZTUFNGSPNEBNBHFTDBVTFECZFYDFFEJOHXFJHIU8IFOUIJTIBQQFOTUIFEFTLXJMMNPWFEPXOXBSEBQQSPYJNBUFMZNNBOEDPNFUPBTUPQXJUI
the current height displayed.
"UUFOUJPO/&7&3SFNPWFPSUVSOPGGUIFQPXFSJOPSEFSUPSFTFUUIFVOJUXIFOJUJTJOBQSPUFDUJWFNPEFPS)05TUBUF
For all of the below Custom Settings:
t 1SFTT
and
TJNVMUBOFPVTMZGPSTFDPOETVOUJMUIFCV[[FSCFFQTPODFBOE4JTEJTQMBZFE
t *GOPPUIFSBDUJPOJTUBLFOXJUIJOTFDPOETUIFQSPDFTTXJMMCFBVUPNBUJDBMMZDBODFMFE
t 5IFQSPDFTTDBOCFDBODFMFENBOVBMMZCZQSFTTJOH
at any time.
Custom Setting 1: Minimum & Maximum Height Settings
t .JOJNVN)FJHIU-JNJU8IJMF4JTEJTQMBZFEQSFTT
once and then press or to set desired minimum height. Press
UPTBWF-44VDDFTTGVM
-'5SZ"HBJO
t .BYJNVN)FJHIU-JNJU8IJMF4JTEJTQMBZFEQSFTT UP41SFTT
once and then press or to set desired maximum height. Press to save:
)44VDDFTTGVM)'5SZ"HBJO
Note: Default minimum height is 62cm (24.4") and the adjustable range is 62-118cm (24.4"-46.4"). Default maximum height is 128cm (50.4") and the
adjustable range is 72-128cm (28.3"-50.4").
CUSTOM SETTINGS