9
8
WHAT’S IN THE BOX?
Tally Pro scale
USB-C to USB-A Charging Cable
Get to Know You Guide
Safety and Maintenance Manual
BATTERY
The device uses a rechargeable lithium polymer battery. You can
charge the battery by plugging the USB cable into any of the power
supplies listed below with an output of 5 volts and 1 amp:
• A USB wall-charger
• A computer
• A DC car-charger
It takes about 1-2 hours to fully charge the battery from empty.
Try not to let the battery completely run out before charging.
Charge the battery as needed.
When you plug in your scale the remaining battery level will flash on
the screen. When the battery is at 25% or below, the scale’s remaining
battery level will show upon the device waking or going to sleep.
To save battery, the scale’s screen will dim after 2 minutes. It will
automatically turn off after 10 minutes without use unless it is in timing.
When timing the scale will automatically turn off after 20 minutes.
Listed/Certified Information Technology (Computer) Equipment or
Listed/Certified ITE Power Supply or Listed Class 2 Power Unit.
CARE AND CLEANING
CAUTION: Do not use abrasive pads or harsh chemicals to clean.
These may damage the surface of the appliance.
Tally Pro is water resistant but NOT waterproof. Do not put any part
of your scale in the dishwasher. Do not immerse the scale in water
or any liquid.
Always ensure that the scale is turned off before cleaning.
Only clean with mild detergent cleaner or warm water. Wipe surfaces
with a damp, soft cloth or sponge.
For a more thorough clean, remove the weigh pan to wipe
underneath. Use only a damp, soft cloth or sponge when cleaning
underneath the weigh pan.
HOW TO REINSTALL WEIGH PAN
1. To remove, first unlock the weigh pan by turning counter-clockwise.
A click will be felt.
2. Continue turning about 30 more degrees until the weigh pan
disengages.
3. To reinstall, place the weigh pan back in position on the base.
4. Align the four engagement notches and then turn about
30 degrees until a click is felt.
