Fellow Ode Brew Safety And Maintenance Download Page 3

5

4

After unpacking the grinder, dispose carefully of the plastic bags and other 

packaging so that children and others cannot reach them.

This appliance has a grounded, three-pronged plug and must be grounded with a 

three-pronged outlet when in use. To ensure protection against risk of electric shock 

or fire, connect to properly grounded outlets only. 

Do not immerse cord, plug, or any other part of the grinder in water or other liquid. 

To protect against risk of electrical shock.

IMPORTANT SAFEGUARDS

Before use, please read these safety warnings carefully and use the grinder properly. 

These safety warnings are indicated for the safe and proper use of this product to 

prevent danger to the user or others and damage to property. When using electrical 

appliances, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS.  

DO NOT THROW AWAY THIS SAFETY GUIDE.

WARNING!

 

  

Shock Hazard: 

This appliance has a grounded, three-pronged plug. To ensure 

protection against risk of electric shock or fire, connect to properly grounded 

outlets only. The plug fits only one way into an outlet. Do not defeat the 

safety purpose of the plug by modifying the plug in any way or using an 

adapter. Do not plug this appliance into an outlet with a voltage other than 

specified on the bottom of this appliance.  

 

Do not use an adapter with this appliance. 

 

A short power supply cord is provided to reduce the risk of becoming 

entangled in or tripping over a longer cord. If a longer cord is necessary, an 

approved extension cord may be used. The electrical rating of the extension 

cord must be equal to or greater than the rating of this appliance. Take care to 

arrange the extension cord to not drape over the countertop or tabletop 

where it can be pulled on by children or tripped over. To avoid an electrical 

circuit overload, do not use any high wattage appliance on the same circuit with 

this appliance. 

The use of attachments not recommended or sold by the manufacturer may cause  

fire, electric shock or injury.

Use only with AC current and the correct voltage. Ensure that your main supply 

voltage is the same as that marked on the underside of your grinder. To avoid  

an electrical overload, do not operate another high-wattage appliance on the  

same circuit.

Never leave the grinder unattended when in use. Close supervision is necessary  

when any appliance is used by or near children. Do not use within a child’s reach.

This appliance is not intended for use by persons (including children) with reduced 

physical, sensory, or mental capabilities, or lack of experience and knowledge, unless 

they are closely supervised and instructed concerning use of the appliance by a 

person responsible for their safety. Close supervision is necessary when any appliance 

is used by or near children. Children should be supervised to ensure that they do not 

play with the appliance.

Grinder must be operated on a dry, flat surface away from the edge of the counter to 

prevent accidental tipping. Vibration during operation may cause the grinder to move.

Do not place where the grinder could touch any other source of heat. For example,  

on or near a hot gas burner or electric burner, in a heated oven, or in a microwave.

Avoid contact with moving parts of the grinder.

Do not tamper with the finger guard covering the electrically grounded chute.

Never move the grinder while the unit is in use.

Check the load bin for any foreign objects that are not coffee beans  

before using. 

Do not put any substances other than coffee beans and grinder cleaner  

into the grinder. 

Use only whole bean coffee in the grinder. Do not put coffee that has already been 

ground into the grinder. Re-grinding coffee that has already been ground can cause 

your grinder to wear out faster and will void the warranty.

Turn the appliance OFF, then unplug from the outlet when not in use, before 

assembling or disassembling parts and before cleaning. Allow parts to stop  

moving before cleaning the grinder. Do not use the grinder without lid properly  

placed on load bin.

Summary of Contents for Ode Brew
























Reviews: