FELLER ENGINEERING SS 242, Manual

Page: 18 / 24

BEFORE FIRST USE
1.
1. Remove any sticker, protective foil or storage cover from the soleplate.
2.
2. Heat up the iron to maximum temperature and iron over a piece of
damp cloth for several minutes for the purpose of removing any residue
on the soleplate according to the section of “Steam ironing”.
NOTE : It is normal that strange odor comes out from the unit for the first use.
This will cease after a short while.
NOTE
: Some particles may come out of the soleplate when you use the iron
for the first time. This is normal; the particles are harmless and stop coming
out of the iron after a short while.
Descaling indicator
If the descaling indicator illuminating, it indicates the steam generator shall
be cleaned by virtue of the mineral deposits collecting to a degree. When
the system ensures the mineral deposits have been removed, the indicator
will be extinguished.
Water tank
The water tank has two chambers, one chamber is used for storing water
for ironing as normal water tank; the other chamber is used for collecting
drainage during automatically cleaning.
Iron release button
The iron can be tightly secured onto the thermal insulation cushion by the
iron release button. After the iron is secured, the whole steam station iron
can be lifted up by grasping the iron’s handle. To remove the iron, just need
to press down the iron release button.
Cord clamp
When not in use, the steam supply hose and power cord shall be stored. Pull
out the cord clamp first, after winding the cord around the cord winding
groove, push the cord clamp back.
6