Economy variant
MCS
�
e
12
13
Functions
In addi�on to the
MCS
�
series, an economy version
with reduced func�onality is available for the hot
runner controllers.
The
MCS
�
e
series is available in two housing sizes
with 2, 4, 6 or 8, 10, 12 zones.
The electronics of the
MCS
�
series have been
adopted for the Economy variant. This means that no
compromises have to be made in terms of control
quality and reliability.
Opera�on is via membrane keypad with 7-segment
display. Two measured values are displayed per zone,
whereby it is possible to switch between setpoint
and actual value or current and output level.
The status of each zone is displayed via four LEDs:
manual mode, automa�c mode, fault and zone
selected.
The status of the controller is signaled via an LED
band in the front. In control mode, this display lights
up green. In the event of a warning or alarm, the
display changes to yellow or red.
The controller can also be switched to standby via an
external control signal.
�
Fast and precise control
�
High-quality electronics guarantee maximum reliability
�
Simple opera�on via clearly assigned func�on keys
�
Mul�ple zones adjustable simultaneously
�
2 display values per zone: setpoint and actual value or hea�ng current and output level
�
Comprehensive monitoring func�ons for: Sensor break, reversed sensor polarity, sensor
voltage, heater current, load short circuit, heater interrup�on, temperature devia�ons, output
level, fuse, triac, relay
�
Opera�ng status visible from afar via LED band
�
Star/delta switching for worldwide use
�
Gentle hea�ng (so� start)
�
Simultaneous hea�ng of all zones with definable temperature devia�on
�
Short circuit detec�on when ac�va�ng the outputs
�
Overvoltage protec�on for sensors
�
Standby ac�va�on via control signal
Housing variants
Zones
2, 4 or 6
8, 10 or 12
Dimensions (W x H x D)
175 x 390 x 275 mm
205 x 390 x 275 mm