CONNECT AS PILOT
DISCONNECT AS PILOT
ON
OFF
To start each boating trip, connect with a simple click on your FOB to
connect as a Pilot. This will allow your engine(s) to start and you will
remain safe while being able to move about the boat.
www.fellmarine.com/mobintro
Disconnect with a simple click on your FOB. We recommend that you
disconnect the Pilot FOB before leaving the boat. Disconnecting while the
engine(s) are running will turn off the engine(s).
The normal FOB to HUB connection
will automatically time-out after 20h
and shut down your engine(s). This is to
prevent unnecessary battery drainage
of the xFOB battery. Click FOB again to
reconnect.
The Pilot FOB acts as a stop button to
shut down the engine(s) at any time.
While the Pilot FOB is connected, click
the button on the FOB to activate stop.
The same stop function can be activated
by clicking on the dash mounted HUB.
Before attempting to connect your
FOB(s), make sure the MOB+ HUB has
power. Typically the MOB+ is powered
from the main house battery. Turn the
boats Master Switch to ON
20h Time-Out
Use FOB to stop engine
Turn ON boat battery
Click & Release to
disconnect
STOP FOB
Disconnected
Automatic engine
stop
Shut down
ignition
Click & Release to
connect
STOP FOB
Connected
You can now start
your engine(s)
Safe to start
driving
Disconnecting the Pilot FOB (STOP FOB)
will disconnect all FOBs regardless of
their connected state and shut down the
engine(s).
Disconnect Stop FOB
ON
See an
introduction
video!
