F-920 Instruction Manual rev. 6-6-2016
1554 NE 3
rd
Ave, Camas, WA 98607, USA
8
Phone: (360) 833-8835
[email protected]
www.felixinstruments.com
begin, press the square start button as prompted to measure.
This will turn on the pump before drawing in sample gas. Trigger
mode will take longer to stabilize if the concentration is in a
different range from the last sample.
The results will be saved to the SD card. Press the square start
button to begin another measurement. Press the Left arrow to
exit to the main menu.
Taking a Measurement
Assemble the probe and connect the needle probe tubing to the
intake of the F-920. Twist on a hydrophobic filter to the end of
the tubing. The filter will prevent any moisture or debris from
entering the instrument. Finally, attach a sterile needle to the
filter. Depending on the application, needles can be re-used.
