Assembly Manual FELIX 3.1 V1
17
51
Align the print head on the carrier
!
52
Tighten the bolt
!
54
1x Bolt M4x12
48
!
label end of the hot-endcable: 0
49
1x Thin square nut M4
1x Bolt M4x40
!
Make sure the sticker from the fan is at the back.
The fan blows on the side of the sticker
Mount the bolt loosely, fasten tight at step 52
label end of the wire: 2
50
Align the print head on the carrier
!
goto step 55
at page 22
