F-900 Instruction Manual rev. 1/16/2014
1554 NE 3
rd
Ave, Camas, WA 98607, USA Phone (360) 833-8835 Fax (360) 833-1914
[email protected] http://www.felixinstruments.com
52
vii.
If Windows can’t verify the publisher of the driver software, click to Install
this driver software anyway.
viii.
Click Ok after driver installation is successful.
3.
After installing the driver, open the
900 Firmware
folder.
4.
Open the
DL203_900.exe
“Transfer Code to CI-203 or F-
900” application.
5.
Select File and Open.
6.
Navigate to the
F-900-ver-x.xx.bin.
This is the code for
the instrument. The .bin file should be located in the same
folder as the DL203_900.exe.
7.
Follow the instructions in the software to hold down the
power button.
8.
Release the power button when instructed.
9.
Wait for the flash to be erased and then written. When the
firmware transfer is complete, the software will indicate
reset sent, followed by “leaving open”. The F-900 will
power off.
