F-751 Avocado Operation Manual Rev. 1/25/2023
Page
|
14
Felix Instruments
1554 NE 3rd Ave
Camas, WA 98607, USA
Phone: +1 (360) 833-8835
Fax: +1 (360) 833-1914
www.felixinstruments.com
[email protected]
Sides Per Fruit
Users can set a default number of sides per fruit. All new bins created will
automatically be set to the sides per fruit chosen by the user.
Highlight
Sides Per Fruit
and press
Right.
Enter the desired number of sides
per fruit and press
Right
to confirm selection.
Scans Per Side
Users can set a default number of scans per side. All new bins created will
automatically be set to the scans per side chosen by the user.
Highlight
Scans Per Side
and press
Right.
Enter the desired number of scans
per side and press
Right
to confirm selection.
Maturity Criteria
The Maturity Criteria Threshold can be used to track the percentage of fruit
that exceeds a specified DM threshold. This statistic is reported in the Bin
Summary menu. The
Maturity Criteria
threshold value and the offset values
can be accessed and edited through this menu.
Highlight
Maturity Criteria
and press
Right.
Enter the desired number and
press
Right
to confirm selection.
Measurement Offsets
The
Measurement Offset
is determined through a calibration process,
which is performed prior to the instrument being shipped. However, in
some cases the user may need to perform an offset calibration to achieve
accurate measurements. If you notice that your instrument is predicting
consistently higher or lower than it should be, please contact
Felix
Instruments Support
to receive instructions on how to perform an offset
calibration.
Highlight
Measurement Offset
> DM
and press
Right.
Enter the desired
number and press
Right
to confirm selection.
