felfil evo, User Manual, Page: 3 / 22

Spooler Manual 3
Warnings
!
Warnings
Felfil S.r.l. does not assume responsibility and expressly disclaim liability for loss, inju-
ries, damage, or expense arising out of or in any way connected with the assembly, han-
dling, storage, wrong use or disposal of the product. Please, read this document before use
Felfil Spooler.
Any kind of modification will be at your own risk, and will result in the decay of the warranty.
Felfil S.r.l. does not take any responsibility for damage occurred to people or object, caused by
such modifications or improper uses.
- Do not use vinyl and PVC, they will produce toxic emissions.
- Do not eat or inhale the filament.
- Do not use the machine if any parts are missing or damaged. If you notice any damage to the
unit, unplug the device immediately and contact the Felfil team for guidance.
Use the device only with specified input power. Using the device with any other input power is
likely to damage the electrical and/or electronic parts of the device.
Remind to keep the equipment out of children’s reach.
Use this device only to spool plastic filament for 3D printing. No other use has been tested.
- Do not insert your fingers in the moving parts.
- Do not throw water on the spooler.
- Do not hit the spooler and its accessories or you could damage the spooler.
- Please, never try to spool a plastic unless you are absolutely certain you know what type it is.
- Some polymers can undergo thermal decomposition resulting in potentially toxic fumes. So
always use the Felfil Spooler in a well ventilated area, or inprecence of a suction hood (not your
bedroom or inside your house), and understand the thermal decomposition properties of the
polymer you are extruding.
- Be sure to check in on it periodically.
The Felfil Spooler is a first-generation, experimental piece of hardware. Treat it as such.
Basically, use common sense.
If you have questions, write us at support@felfil.com
Caution