felfil evo, User Manual, Page: 15 / 22

Spooler Manual
User Manual
15
> Diameter: 1.75
1.74 0.69
Let the filament pass through the supports and between the puller wheels. Then guide it
in the distribution support.
Once the filament is pushed in the measuring system the puller wheels will start to rotat-
ing and the following information will appear. This is the main working interface of Felfil
Spooler.
This is the read
diameter, it will
constantly change
during extrusion
This is a menù item. This will
change rotating the knob. More
info on next pages.
This is the extrusion
speed (meter per
minute).
> Diameter: 1.75
1.74 0.69