6
!
Dust Extractor
RL 250/RL 300
1.2 Information about the manual
This manual describes how to operate the machine
properly and safely. Be sure to follow the safety tips and
instructions stated here as well as any local accident
prevention regulations and general safety regulations.
Before beginning any work on the machine, ensure that
the manual, in particular the chapter entitled “Safety”
and the respective safety guidelines, has been read in its
entirety and fully understood. This manual is an integral
part of the machine and must therefore be kept in the
direct vicinity of the machine and be accessible at all
times. If the machine is sold, rented, lent or otherwise
transferred to another party, the manual must accompany
the machine.
Attention! This operating manual contains general guidelines on how to transport, set up, operate and
maintain the filter system.
The information contained in this manual is based on
practical experience acquired over many years. It is
recommended to comply exactly with the technical speci-
fications to guarantee the best possible results and a safe
operation of the machine. Read this operating manual
carefully and keep it in a safe place. If you have any
questions or are unclear about the instructions, please do
not hesitate to contact us. Please have the machine serial
number at hand when you contact us.
• This operating manual is designed for english spoken
technicians.
• If the instructions in this operating manual are not
observed, the guarantee claim is null and void.
• The filter system may only be operated, maintained
and put into operation by personnel who have read
and understood the operating manual and are famil-
iar with the applicable working safety and accident
prevention regulations.
• Keep this operating manual close at hand and en-
sure it is easily accessible to every operator.
• In addition to the operating manual, comply with
the local applicable accident prevention rules and
regulations.
Attention! This system was manufactured according to state-of-the-art technology and the safety standards
in force. This does not, however, exclude the risk of bodily injury, system damage or other material dam-
ages when used.
The system may only be used if it is technically defect-free and if the instructions in the technical operating
manual are followed and applied to the intended range of operations. The system may only be operated
by responsible personnel aware of the dangers and risks of operating the system. Malfunctions, in particu-
lar those, which affect the occupational safety must be eliminated immediately.
General
