57
FS 700 K
Use
4.
Switch machine on.
5.
First place the workpiece against the fence and then guide it to the sanding
belt.
9.3.6
Sanding of long workpieces
Fig. 40: Sanding of long workpieces
WARNING
Running sanding belt
Through contact with the running sanding belt it could cause
serious cut or abrasion injuries.
−
Avoid contact with the running sanding belt.
−
Only use the machine in manual operation.
−
Only process workpieces in reverse operation.
−
Ensure that workpieces cannot be ejected (use a workpiece
fence).
Take note of general procedures for permitted working methods.
1.
Extend the processing surfaces.
Chapter 8.6 ‘Extending the machining
area (long workpieces)’ on page 50
2.
Adjust the table height to the workpiece to be processed.
3.
Check that all clamping levers are tightened firmly.
4.
Switch machine on.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......
