55
FS 700 K
Use
9.3.4
Sanding on the longitudinal side of the machine
The following operations can be carried out:
●
Sanding joist sides.
●
Sanding of radius.
●
Correcting uneven areas (Window angle).
●
Head sanding.
1
Fig. 38: Sanding at the front of the machine
1 Workpiece fence (accessory)
WARNING
Running sanding belt
Through contact with the running sanding belt it could cause
serious cut or abrasion injuries.
−
Avoid contact with the running sanding belt.
−
Only use the machine in manual operation.
−
Only process workpieces in reverse operation.
−
Ensure that workpieces cannot be ejected (use a workpiece
fence).
1.
Set the table height correct to the workpiece.
2.
Clamp all of the clamping levers.
3.
Switch machine on.
4.
First place the workpiece against the fence and then guide it to the sanding
belt.
Summary of Contents for FS 700 K
Page 6: ...6 Table of contents...
Page 59: ...59 FS 700 K Use 4 Switch machine on...
Page 75: ......