Operating and installation instructions
FELA SWITCH CASAMBI | stationary 230 Volt wall switch / mobile battery switch
Status April 2020
FELA GmbH | Sturmbühlstraße 180 – 184 | 78054 Villingen-Schwenningen | HRB 600 728 Freiburg
Page 3 of 13
QUALIFIED PROFESSIONEL ELECTRICIAN
Installation and connection of electrical devices may only be carried out by qualified electricians in
compliance with the applicable accident prevention regulations. The five safety rules of electrical
engineering (DIN VDE 0105) must be observed.
You are a qualified electrician if you know the relevant standards and guidelines due to your
professional education, training and experience, if you can carry out the electrical connections
professionally and safely according to the attached wiring diagram and if you can recognize and
avoid risks and dangers due to electricity.
INTENDED USE
FELA SWITCH CASAMBI is used to control lights or actuators according to the CASAMBI standard. Other
devices with other network protocols cannot be used.
The FELA SWITCH CASAMBI devices are intended exclusively for domestic use and similar purposes.
Operation is only permitted with:
•
Fixed installation within buildings (FELA SWITCH CASAMBI stationary 230 Volt)
•
Installation on the wall (FELA SWITCH CASAMBI stationary 230 Volt).
•
electrical flush-mounted connection (FELA SWITCH CASAMBI stationary 230 Volt)
SAFETY INSTRUCTIONS AND WARNINGS
Indicates a potentially hazardous situation that could result in minor or moderate injury.
Inobservance may result in in severe injury, fire or property damage.
Indicates a possible situation that could lead to material damage to the product or its surroundings.
