FAQ • G6 PLUS
5) The gimbal vibrates when an action camera or smartphone is mounted.
How do I deal with it?
A suggestion to this problem is to choose the front row (see below) when
attaching either a smartphone or an action camera to the G6 Plus because
the center of gravity of either of them lies a distance away from the geometric
center. If you still experience vibrations, follow the tips outlined in Question 4.
6) Why is the gimbal not level and how do I calibrate it?
Due to the following reasons, the gimbal might be not level.
1
The gimbal has not been used for a long period of time.
2
Extreme temperature variations between indoor
and outdoor.
3
Extreme variations in geographical setting, such
as from South to North region, or from lower
altitudes to high altitudes.
Two ways to calibrate the gimbal:
1
Initialization.
2
If the initialization did not work, please connect
the gimbal to the Feiyu ON App and choose
horizontal calibration to make the gimbal level
again. The interface is shown below.
7) The gimbal couldn’t be powered on by pressing the function button for
2-3 seconds, nothing appears on the screen and it goes off if I don’t keep
pressing. What is wrong with the gimbal?
You have to long press the function button for about 10 seconds until the logo
FY shows on the screen when you switch on the gimbal for the first time after
updating keyboard firmware.
8) The G6 Plus spins out of control after I have updated the firmware via the
Feiyu ON App. What should I do?
There are two things:
1
The internal cable connected to the tilt motor might be loose. Disassemble
the chip cover and reconnect the loose cable;
2
Some of parameters become ZERO and the gimbal should be re-calibrated
by a private software which is not available to end-users.
