Firmware Upgrade
Initialize The Gimbal
Video And Camera Charging Interface
Parameters
USB Cable
Function
Interface
Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest firmware.
Unzip the compressed file locally to your computer. Refer to the connection diagram on how to connect the gimbal with the computer. Please
follow the instructions in the firmware upgrade package carefully, otherwise the Gimbal can not work normally.
Firmware Upgrade Instruction
!
Be sure to insert the
batteries before upgrading
WARNING
Make sure that the
connection to the
computer is done by the
!
USB Connector
Attention : Please make sure that the connection to the computer is done by the USB connector.
This interface can be output 5 voltage and receive
analog video signal from GoPro
Connect the video output and camera charging cable
as the above diagramcan power the GoPro camera and
view video signal from the GoPro camera.
Note: The Analog Monitor are equipped by users.
After connecting the video output and camera charging
cable, the analog monitor can be used as a display.
FY WG Mini 2-Axis Wearable Gimbal is a feature-rich camera stabilizer, yet lightweight and portable.
It is prohibited for any user to use the gimbal for any illegal purposes.
Guilin Feiyu Electronic Technology Co.,Ltd and our associates assume no liability for any accident, injury, death,
loss, or other claim related to or resulting from the use of this product. In no event shall Guilin Feiyu Electronic
Technology Co.,Ltd and our associates be liable for incidental or consequential damages relating to or resulting
from the use of this product or any of its parts. Damage resulting from use, accident, or normal wear and tear is
not covered by our warranty. Guilin Feiyu Electronic Technology Co.,Ltd reserves the right to amend this manual
and the terms and conditions of this product at any time.
D I S C L A I M E R
AT T E N T I O N
Initialization Instructions
FY WG Mini needs to be initialized whenever the
following situations are observed after power on
1. Ensure gimbal is fully assembled and camera is installed properly.
2. Place the gimbal on a flat surface and keep it stationary.
3. Power on the Gimbal.
4. Wait for the gimbal to finish its initialization before resuming the
use of the gimbal.
1. The tilt angle is not leveled with the horizontal
surface.
2. When the gimbal is stationary, the camera
does not stay stationary.
▲ Please assemble the gimbal in accordance to the diagram provided.
▲ Please upgrade the firmware with the provided USB data cable and
USB connector.
▲ Please charge the battery with the provided battery charger.
▲ Please install the camera securely before powering on the gimbal.
Function
Interface
Video Output Cable
Analog Monitor
( Equipped By Users )
( Equipped By Users )
8
PC
5
7
6
Upgrade........
95 mm
66 mm
35.5 mm
90 mm
146.5g ( Without batteries & camera )
3°/S ~ 150°/S
Camera Maximum Thickness
31.7 mm ( Replaceable mounting bracket )
Camera Maximum Height
43.6 mm ( Replaceable mounting bracket )
Usage Time
3 ~ 4 Hours
320°
320°
Vertical Tilting Angle
Horizontal Panning Angle
Panning Increments
Weight
Motionless Flat Surface
