manualshive.com logo in svg

FeiYu Tech AK2000S, Instruction, Page: 2 / 36

Share
Download
FeiYu Tech AK2000S Instruction Download Page 2

2

Catalogue

1. Product Overview  ……………………………………………… 2

2. Start to Use  ……………………………………………………… 4

2.1 Charging ……………………………………………………………………… 4

2.2 Position Lock ………………………………………………………………… 4

2.3 Camera Installation  ………………………………………………………… 5

2.4 Gimbal Balancing  …………………………………………………………… 6

2.5 Power ON/OFF  ……………………………………………………………… 8

3. Function operation ……………………………………………… 8

3.1 Mode/Function Introduction  ……………………………………………… 8

3.2 Button Operation  …………………………………………………………… 10

3.3 USB Port ……………………………………………………………………… 12

3.4 Touch Screen ………………………………………………………………… 13

3.5 Modes Setting  ……………………………………………………………… 14

3.6 Motion-timelapse Mode  …………………………………………………… 17

3.7 Initialization   ………………………………………………………………… 19

3.8 Manual Lock  ………………………………………………………………… 20

4. Feiyu ON App  …………………………………………………… 21

4.1 Download the Feiyu ON App  ……………………………………………… 21

4.2 App Connecting ……………………………………………………………… 21

4.3 Firmware Upgrade  ………………………………………………………… 22

5. Accessories  ……………………………………………………… 23

5.1 Tripod  ………………………………………………………………………… 23

5.2 Versatile Arm  ………………………………………………………………… 23

5.3 Brushless Follow Focus  …………………………………………………… 24

5.4 Hyperlink Remote Controller  ……………………………………………… 24

5.5 Extension Rod  ……………………………………………………………… 25

5.6 Multifunctional Bracket  …………………………………………………… 26

5.7 Wireless MIC Kit ……………………………………………………………… 26

6. Specifications  …………………………………………………… 29

Compatible Cameras for Reference  …………………………… 30

Disclaimer …………………………………………………………… 32

Summary of Contents for AK2000S





































Reviews:

No comments