2
4
Installation
Planting the Mounting Stake in the Ground
Find the desired location. Plant the mounting stake (CC) by firmly
pressing it into the soil, use a rubber mallet (not included) if
necessary, until the entire stake is in the ground.
•
NOTE:
If the soil is hard, dig or wet the
ground, to make it easier to plant the stake.
NOTE:
Cables can be
buried at a maximum
depth of six inches. Make
sure all connectors are
tightly secured.
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www.feit.com
1
•
Attach Smart Landscape Light to Mounting Stake
3
Adjust the Head Angle
Make sure to clear out the debris on top of the stake. The cables can go through the base slot of the mounting stake (CC). Attach the
Smart Landscape Light (AA) to mounting stake (CC). Rotate to the desired position before fastening the barrel nut clockwise until it is
fully secure.
•
•
CC
AA
AA
CC
CC
Barrel Nut
Turn thumbscrew
counterclockwise
to loosen.
Loosen the thumbscrew by turning counter-clockwise. Adjust the Smart Landscape Lights (AA) to the desired angle.
Fasten the thumbscrew by turning clockwise until it is fully secure.
AA
AA
Turn thumbscrew
clockwise
to tighten.
