Works Out of the Box / No Assembly Required
4
WWW.FEIT.COM
Vertical Pivoting
The Rechargeable LED Flood Light can pivot
vertically into the desired position. To pivot
vertically, simply adjust the flood light to your
preferred position/angle. Once set to your
desired position, additional tightening can be
done by hand.
Pivoting knob
Remote Control Instructions
ON/OFF
WARNING:
These products may represent a possible shock or fire hazard if improperly
installed or attached in any way. Products should be installed in accordance
with this install guide, current electrical codes and/or the current National
Electric Code (NEC).
NOTE:
Obstructions can reduce the range of the remote. Test the
remote performance before installation.
W
G
R
B
Custom Color
Mix Mode
Pause/Play
Custom
Color Mix
Timer
Power
Dimming
20 Preset
Colors
Mode
Speed
Mode Description
•
Auto:
Rotate through different modes.
•
Flash:
Turns color On and Off.
•
FadeMix:
Smoothly transitions through custom colors.
•
Fade7:
Smoothly transitions through 7 preset colors.
•
CycleMix:
Rotates through custom colors.
•
Cycle7:
Rotates through 7 preset colors.
Press to turn ON/OFF
Pause the mode
Adjust brightness level
Create and save up to
3 custom colors
Repeats every
24 hours. Set how
many hours the light
will stay ON.
Adjust the speed of
color changing modes
Choose a color
changing effect
Choose a color changing
effect for custom colors.
Set Timer
1. Choose a 3, 6, or 12 hour interval using the timer buttons.
2. The light will turn on once every day for the selected interval until the
timer is canceled or the device is unplugged.
3. To cancel the timer, press one of the timer buttons rapidly three times
until the Flood Light flashes twice indicating the timer has been canceled.
Control Multiple Flood Lights with One Remote
Multiple Flood Lights can be controlled together by pairing them to
one remote.
How to Pair to a New Remote
Plug in the Flood Light to 120V receptacle. Within 3 seconds, press and
hold the power button on the remote. The Flood Light will blink 3 times
indicating it is now paired.
On battery mode
While the unit is off, hold the On/Off button on the Flood Light until the
light turns on, then press and hold the Power button on the remote
control within 3 seconds. The Flood Light will blink 3 times indicating it
is now paired.
How to Unpair
Plug in the Flood Light to 120V receptacle. Within 3 seconds, press and
hold the power button on the remote. The Flood Light will blink 6 times
indicating it has now unpaired.
On battery mode
While the unit is off, hold the On/Off button the Flood Light until the
light turns on, then press and hold the Power button on the remote
control within 3 seconds. The Flood Light will blink 6 times indicating
it is now unpaired.
Create a Custom Color
1. Press the MIX1, MIX2, or MIX3 button
2. Create a custom color by adjusting Red, Green, and Blue using
the up or down arrows.
RANGE: UP TO 15 FEET
