1
Installation Instructions for
1A
1.0
W 1842
B
W 1842
B
Wall
JUNCTION BOX
MOUNTING
PLATE
3
4
ALLEN KEY
CAUTION RISK OF FIRE
-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
5
SET SCREW
FIXTURE BASE
Paulson Wall
Secure the mounting plate to the junction box.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the set screw using an Allen wrench.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
6
G
P
I
:
ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
compliant junction
NEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED
LED
lamps may be dimmed with a
dimmer. Consult lamp manufacturer for
additional information.
LAMP
SOCKET
6
