background image

Specification

Bluetooth 5.0 Chipset:   

CSR 8675

Supported profiles:  

A2DP, AVRCP

Supported Codecs: 

 

ƒ

RX-Mode:  

 

aptX-HD, aptX Low Latency, aptX, SBC

 

ƒ

TX-Mode:  

 

aptX-HD, aptX Low Latency, aptX, SBC

RF output power:   

max. 5.90 dBm at GFSK-Modulation (3.89 mW)

Digital to analog conversion: 

16 bit / max. 48 kHz / SNR > 92 dB

Analog to digital conversion: 

16 bit / max. 96 kHz / SNR > 96 dB

Channel separation /Crosstalk:  -89 dB
Power consumption: 

max. 1,5 W / 300 mA / 5 V DC

Operating temperature: 

-10°C bis +55°C 

Dimensions: 

 

134 x 74 x 27 mm

Bluetooth Class II:   

Receiving range maximum 15 m

 

 

 

Transmission range maximum 50 m (outdoors)

Bluetooth frequency: 

2402–2480 MHz

Qualcomm aptX & CSR8675 are products of Qualcomm Technologies, Inc., Bluetooth is a registered trademark of 
Bluetooth SIG

Safety Instructions

Use the device only in environments where Bluetooth wireless technology is permitted. Do not use the device if it has 
been damaged or exposed to liquids. Do not expose the device to extreme temperatures, fire or humidity. Keep the 
device, packaging and accessories away from children and pets to prevent accidents and suffocation.

Manufacturer‘s declaration

Herewith Spreewald Kommunikationstechnik GmbH declares that the radio system type ABT00102 complies with the 
directive 2014/53/EU and further declares that this product is in conformity with the rules of the EU directives (inclu-
ding all applicable amendments) 2011/65/EU „RoHS2“ and 2001/95/EC „General Product Safety Directive“. 
The full text of the EU Declaration of Conformity is available at the following Internet address 

https://feintech.eu/ce

 Electronic products contain valuable raw materials and must not be disposed of with normal household waste. 
At the end of its service life, please bring the device to your local recycling facility.

FeinTech is a registered Trademark of Spreewald Kommunikationstechnik GmbH,  
Radensdorfer Hauptstr. 45 a • 15907 Lübben (Spreewald) • Germany • [email protected]

Summary of Contents for ABT00102











Reviews: