8
en
Symbols.
Symbol, character
Explanation
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Do not touch the saw blade
Disconnect the energy supply prior to this work step. Otherwise there
may be danger of injury caused by unintentional starting of the pneu-
matic tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
A surface that can be touched may be very hot and thus hazardous.
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false
reaction can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause severe
or fatal injury.
This sign warns of a possible dangerous situation that could cause injury.
Pneumatic tools and other electro-technical and electrical products
taken out of service should be collected separately and sorted for
environment-friendly recycling.
Steel
(**)
may contain numbers and letters
DANGER
WARNING
CAUTION
Character
Unit of measurement,
national
Explanation
n
0
rpm; /min; min
-1
; r/min
Stroke rate at no-load
P
W
Unit of measure for power
°
Angle width
U
V
Unit of measure for voltage
f
Hz
Frequency
I
A
Unit of measure for current
m
kg, lbs
Mass
l
ft, in
Length, width, height, depth, diameter or thread
Ø
ft, in
Diameter of a round part
m, s, kg, A, mm, V, W,
Hz, N, °C, dB, min, m/s
2
Basic and derived units of measurement from the
international system of units
SI
.
OBJ_BUCH-0000000116-003.book Page 8 Tuesday, December 6, 2016 11:00 AM
