Fein KS10-38E, Instruction Manual

Page: 14 / 155

14
en
en Original Instructions for Fillet Weld Grinder.
Symbols, abbreviations and terms used.
Symbol, character Explanation
General prohibition sign. This action is prohibited.
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
A surface that can be touched may be very hot and thus hazardous.
Gripping surface
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Low speed
High speed
WARNING
Character Unit of measure,
international Unit of measure,
national Explanation
n /min rpm Rated speed
P
1
W W Power input
P
2
W W Output
U
V V Rated voltage
f
Hz Hz Frequency
M... mm mm Size of metric thread
Ø mm mm Diameter of a round part
mm mm Ø
D
=Max. diameter of grinding wheel
Ø
H
=Diameter of mounting hole
T=Thickness of the grinding wheel
mm mm M=Thread for clamping flange
l=Length of mounting thread
kg kg Weight according to EPTA-Procedure 01/2003
OBJ_BUCH-0000000037-001.book Page 14 Monday, June 6, 2011 12:51 PM