background image

KBM 52 U / KBM 50 Q

15

EN

For your safety.

Do not use this power tool before you 
have thoroughly read and completely 

understood this Instruction Manual and the 
enclosed “General Safety Instructions” (docu-
ment number 3 41 30 054 06 1), including the 
figures, specifications, safety regulations and the 
signs indicating DANGER, WARNING and 
CAUTION.

Please also observe the relevant national 
industrial safety regulations
(e.g. in Germany: BGV A2).
Non-observance of the safety instructions in the 
said documentation can lead to an electric shock, 
burns and/or severe injuries.
This Instruction Manual and the enclosed “Gen-
eral Safety Instructions” should be kept for later 
use and enclosed with the power tool, should it 
be passed on or sold.

DANGER

This sign warns of a directly imminent, dangerous 
situation. A false reaction can cause a severe or 
fatal injury.

WARNING

This sign indicates a possible dangerous situation 
that could cause severe or fatal injury.

CAUTION

This sign warns of a possible dangerous situation 
that could cause injury.

It is forbidden to dispose of 
the product in the unsorted 
household waste.

Worn out power tools and other electrotechnical 
and electrical products should be sorted sepa-
rately for environment-friendly recycling.

Class of protection I

Product with basic insulation and additional con-
nection to the earth conductor of all touchable 
and conductive parts.

mm

Millimeter

Unit of measure for length, width, height or depth

kg

Kilogram

Unit of measure for the mass

V

Volt

Unit of measure for the electric voltage

A

Ampere

Unit of measure for the electric current intensity

W

Watt

Unit of measure for the output

N

Newton

Unit of measure for the force

min

Minutes

Unit of measure for the time

~ or a. c.

Current type

Alternating current

 or d. c.

Current type

Direct current

1 ~

Power supply type

Alternating current single-phase

n

o

No-load speed

Revolution speed at no-load

1/min

per minute

Unit of measure for number of revolutions, 
strokes, impacts or oscillations per minute

Ø

Diameter

Diameter of a round part

Symbol

Term, meaning

Explanation

3 41 01 063 06 0.book  Seite 15  Donnerstag, 12. Mai 2005  8:42 08

Summary of Contents for KBM 52 U














Reviews: