KBE 35 N24; Holemaker III
7. Assembly
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
47
of
61
Fitting the guide
1. Place the pressure piece (1) in the correct position.
2. Position the guide strip (2) and press onto the housing.
3. Insert the five cylinder head screws.
4. Position the guide strip (3) and press onto the housing.
5. Insert the five cylinder head screws.
6. Insert the five set screws (4).
The guide clearance is adjusted after installation of the drill motor.
7. Position the leaf spring (5).
8. Screw in the screw (6) [1.1 Nm
±0.15 Nm
].
Tools:
- Socket head wrenches,
3 mm; 2.5 mm
- Torx T10
1
2
3
4
6
5