KBE 35 N24; Holemaker III
7. Assembly
C-SC_CSSM
Version 1.0
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
34
of
61
Fitting the gearbox housing
1. Apply a layer of grease to the three sealing rings (1).
2. Fit the three sealing rings (1).
3. Fit the hose socket (2) [1.8 Nm
±0.25 Nm
].
4. Fit the sleeve (3).
5. Press in the grooved ball bearings (4).
6. Coat the shaft (5) with grease.
7. Press in the shaft (5).
8. Fit the circlip (6).
Tools:
- Arbor press
- Sleeve
7 mm inner diameter
18 mm outer diameter
- Sleeve
5 mm inner diameter
15 mm outer diameter
- Circlip pliers
1
4
5
6
Picture similar
Picture similar
Picture similar
Picture similar
2
3
