14
en
Noise emission values.
Repair and customer service.
Repairs may be carried out only by qualified per-
sons in conformity with the valid regulations.
For repairs, we recommend our FEIN customer
service centre, the FEIN authorised service centres and
FEIN agencies.
Products that have come into contact with asbestos
may not be sent in for repair. Dispose of products con-
taminated with asbestos according to the applicable
country-specific regulations for such disposal.
When the machine's power supply cord is damaged, it
must be replaced by the manufacturer or their repre-
sentative.
Renew stickers and warning indications on the power
tool when aged and worn.
The current spares parts list for this power tool can be
found on our website at www.fein.com.
Use only original spare parts.
Carry out the following maintenance regularly:
Blow out the ventilation slots (
13
) at the motor
housing and the marked locations with com-
pressed air (see Instruction label (
21
)).
Lubricate the machine daily (when in use) with
machine oil at the locations marked (see Instruc-
tion label (
21
)).
Check the drive disc (
17
) and the contact disc (
15
) for
wear and damage each time when replacing a grinding
belt. Have damaged parts replaced.
If required, you can change the following parts yourself:
Grinding belt, spark guard
Warranty and liability.
The warranty for the product is valid in accordance
with the legal regulations in the country where it is mar-
keted. In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer’s warranty dec-
laration.
The delivery scope of your machine may include only a
part of the accessories described or shown in this
instruction manual.
Declaration of conformity.
This
CE declaration
is only valid for European Union
and EFTA (European Free Trade Association) countries
and only for products intended for the EU- or EFTA
market. After placing the product on the EU market the
UKCA mark loses its mark validity.
The
UKCA declaration
is only valid for the Great
Britain market (England, Wales and Scotland) and only
for products intended for the Great Britain market.
After placing the product on the Great Britain market
the CE mark loses its mark validity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the
last page of this Instruction Manual.
Technical documents at:
C. & E. Fein GmbH
Hans-Fein-Straße 81
73529 Schwäbisch Gmünd-Bargau, Germany
Environmental protection, disposal.
Packaging, worn out machines and accessories should
be sorted for environment-friendly recycling.
Connection diagrams.
Type GI100
Page 182
Type GI100 EF
Page 183
Type GI1002V
Page 184
Idle
Sanding
A-weighted emission
pressure power level
measured at the work-
place L
pA
(re 20 μPa),
in decibels
81
91
Measuring uncertainty
K
pA
, in decibels
4
4
Measured A-weighted
sound power level
L
wA
(re 1 pW), in dec-
ibels
91
100
Measuring uncertainty
K
wA
, in decibels
2.5
2.5
Operating conditions
Speed (rpm)
3 000
3 000
Material
–
ST 37
Dimension
–
8 x 40
Grinding belt
–
GRIT by Fein
36Z
REMARK: The sum of the measured emission value
and respective measuring inaccuracy represents the
upper limit of the values that can occur during meas-
uring.
Wear hearing protection!
Measured values determined in accordance with the
corresponding product standard (see last page in this
Instruction Manual).
Summary of Contents for GRIT GI100
