FSC 500 QSL; FSC 1.7; FSC 1.7 Q
6. Removal
C-SC_CSSM
Version 1.0
2018-04-16
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
13
of
24
Removing the tool head
1. Place extractor tool (1) on armature.
2. Heat tool head (2) with hot air gun [600 °C] on right and left sides at an angle of 45 degrees for 10 seconds.
3. Pull armature (3) out of tool head.
4. Remove the needle bearing (4).
Tools:
- Press-in fixture
- Extractor tool
- Hot air gun
- Vice
3
1
2
4
Photo shows similar
product
Photo shows similar
product
Photo shows similar product
