5
en
en
Original Instructions.
Symbols, abbreviations and terms used.
The symbols in the Instruction Manual and on the machine shall aide in directing your attention to possible hazardous
situations when working with this machine.
For your safety.
Do not use this sub base before you have thor-
oughly read and completely understood these
operating instructions, including the figures, speci-
fications, and safety regulations.
Read and observe the operating instructions of the
machine, which is to be mounted to this sub base.
Please also observe the relevant national regulations on
electrical safety and occupational safety.
Non-observance of the safety instructions in the said
documentation can lead to an electric shock, burns
and/or severe injuries.
These operating instructions should be kept for later use
and enclosed with the device, should it be passed on or
sold.
Symbol, character Explanation
Do not touch the rotating parts of the machine.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General Safety
Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
may be danger of injury caused by unintentional starting of the machine.
Use eye protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Danger warning
This symbol confirms the certification of this product for the USA and Canada.
Worn out machine and other electrotechnical and electrical products should be sorted sepa-
rately for environmental-friendly recycling.
3~
Mains supply: three-phase alternating current
/I
Product with basic insulation plus additional insulation on touchable, conductive parts connected
to the protective conductor.
(**)
may contain numbers and letters
Character
Unit of measurement,
national
Explanation
n
/min, min
-1
, rpm, r/min
Fan speed
P
1
W
Power input
U
V
Rated voltage
f
Hz
Frequency
cfm, m3/h
Flow rate
hPa
Vacuum
lbs, kg
Weight
m, s, kg, A, mm, V, W, Hz,
N, °C, dB, min, m/s
2
Basic and derived units of measurement from the international
system of units
SI
.
OBJ_BUCH-0000000328-001.book Page 5 Friday, September 14, 2018 8:27 AM
