Fein Dustex 35 LX AC, Original Instructions Manual

Page: 37 / 344

37
en
Accessories (see page 9/20)
Mount accessories applying only slight
pressure. For disassembling, turn the
parts somewhat against each other
and pull apart.
Transport
The vacuum cleaner is not
suitable for handling by crane.
Do not hang the vacuum
cleaner to a crane hook. Otherwise,
you could injure yourself or damage
the vacuum cleaner.
Lock the lockable castors when
transporting the vacuum cleaner in
vehicles (see page 8).
Carry the vacuum cleaner only by the
handle, not by the push bar.
Only for Dustex 35 MX AC (**): Seal off
the vacuum connection with the plug
(see page 18).
Repair and customer service.
Prior to any maintenance and
cleaning, disconnect the vacuum
cleaner from the power source (pull
mains plug).
Check the connections, seals and
hoses. Have damage repaired only
through a qualified repair person and
only using original FEIN replacement
parts.
Only for Dustex 35 MX AC (**): For
transport and maintenance of the
vacuum cleaner, seal off the vacuum
connection with the plug (see
page 18).
Use commercially available, non-
scouring cleaning agents and water for
cleaning the vacuum cleaner. After
cleaning, allow the vacuum cleaner to
dry completely.
Empty the container each time
after using and remove coarse
debris and dust.
Empty the container after vacuuming
liquids. Afterwards, run the vacuum
cleaner with the accessories
connected for several minutes in
order to dry them.
Dispose of used flat-fold filters and
filter bags according to statutory
regulations.
When replacing the power cable is
required, have this carried out by
FEIN or by an authorized FEIN
Service Agent, in order to avoid
hazardous situations.
Have a dust-technical inspection
carried out at least once every year by
the manufacturer or an instructed
person, e. g. for damage of the filter,
function and tightness against leakage
of the vacuum cleaner as well as
function of the control/monitoring
unit (for Dustex 35 MX AC (**)).
For category L and M vacuum cleaners
that were in contaminated environ-
ments, the exterior as well as all
machine parts should be cleaned or
treated with sealants. When perform-
ing maintenance and repair work, all
contaminated components that can-
not be cleaned to satisfactory must be
disposed of. Such components must
be disposed of in impermeable plastic
bags conforming with the valid regula-
tions for the disposal of such waste.
For maintenance on behalf of the user,
the vacuum cleaner must be disassem-
bled, cleaned and maintained as far as
feasible, without causing a risk for the
maintenance personnel or other
OBJ_BUCH-0000000207-001.book Page 37 Monday, October 12, 2015 11:09 AM