13
en
Changing the tool.
Before mounting or replacing cutting tool or accessories, pull the power plug.
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Mounting the saw blade (figure 3).
Remove the two hexagon nuts on the stroke
rod with the open-end wrench.
Remove the clamping plate.
Mount the saw blade and clamping plate onto
the stroke rod.
Tighten the hexagon nuts again.
WARNING
1.
2.
3.
OBJ_BUCH-0000000076-003.book Page 13 Monday, September 23, 2019 9:51 AM
