ASCD 12-150 W4; ASCD 12-150 W8
7. Fitting
C-SC_CSSM
Version 1.0
2018-06-13
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
21
of
24
Fitting the housing
1. Place the pressure piece (1) in the correct position.
2. Position the motor housing (2).
3. Screw in the ten screws (3) [1.2 Nm
±0.1 Nm
].
4. Position the gearbox housing (4).
5. Fit the circlip (5).
6. Screw in the four screws (6).
Tools:
- Torx T10; T15
- Circlip pliers
5
1
3
2
4
6